| NS-G96,
NS-H96 and RS-308 |
 |
 |
NORMAND spreader is perfect to spread
sand, salt and other aggregate to control
ice and snow on driveways, parkings lots
and side walks. This heavy duty spreader
is mounted and dismounted easily on pick-up
and platform trucks 3/4 to 1 ton. The
in-cab control panel allows you to operate
the gas engine, the conveyor and the spinner.
|
| SPECIFICATIONS |
| Capacity |
2.3
cu.yard |
| Length
(hopper) |
8' |
| Length
(overhall) |
121'' |
| Width
(hopper) |
50'' |
| Height
(hopper) |
40 1/2'' |
| Height
(overhall) |
59 3/4'' |
| Side wall
slope |
45 degrees |
| Conveyor |
12''
wide |
| Spinner |
12'' |
| Flow gate |
8 x
4 1/2'' |
| Body construction |
12 ga.
steel |
| Vehicule |
3/4
et 1 tonne |
| Top screen |
2 pièces |
| Weight |
1000
lbs |
OPTIONS
Two pieces top screen
Hydraulic motor. (1 or 2) |
|
|
TOP
SCREEN
Top screen in 2 pieces mounted on hinges
for easier access to the hopper. |
| HOPPER
- Full welded 12 ga. steel.
- 45 degree sloped sides walls for free
flow of material to conveyor.
- Four corner lift hooks, easy mounting
and removing from your truck.
- Epoxy primer and a coat of uretane paint.
- Continuous welding prevent rusting.
|
|
FLOW GATE
Adjustable rear gate mounted on polyethylene
UHMV skid allows you to control the flow
of material.
|
 |
CONTROL
PANEL
In-cab
control panel permit you :
- To start, stop and choke the engine.
Engine running indicator
light.
- To control the engine RPM (throttle)
at variable speed.
- Control the conveyor and spinner
with
the clutch on tree differents
positions switch
(on/off/blast). Clutch
running indicator light.
- Cable for installing control panel
in-cab
with fast coupling near
spreader.
- Battery cable included. Battery
not included.
|
|
CONVEYOR
- 12” conveyor chain with cross
bars every 5”.
- Conveyor chain bender.
- All roller bearing are equipped with
grease fittings.
- Gear box is driven with a #40 roller
chain.
|
 |
GAS ENGINE
- Electric starter
- Honda 11 HP gas engine.
|
HYDRAULIC DRIVE
Optional hydraulic drive : Available with
single hydraulic motor drive, or dual
hydraulic motor drive for independent
conveyor and spinner speed control. Vehicule
must be equipped with a hydraulic system
capable of producing 12 GPM at 1500 PSI.
|
 |
SPINNER ASSEMBLY
12” steel disk spinner.
Variable spread pattern control.
Adjustable baffles to control spread width.
(2 adjustable side baffles and one ajustable
rear baffle. |
